How to send datalog after disconnecting from the vehicle and performing function failure by Autel MaxiIM IM608 or IM608 Pro.
Step 1 Click “Data Manager” Step 2 click “Data Logging” Step 4 history performed funcitons Step 5 click “right arrow” to the corresponding function page to send to log Step 6 describe what’s the failure Step 7 send the log
Volvo VOCOM II and Premium Tech Tool (PTT) 2.7 is the latest diagnostic tool for Volvo Heavy Duty Diagnostic and programming. Premium Tech Tool is available as a connected version or as an unconnected version. Volvo VOCOM II 88894000 with APCI PTT 2.7.25 Tech Tool
Premium Tech Tool vocom developer tool: 1. Dealer tool to access and program parameters in Level2 and Level3 without connecting to central severs; 2. Works with Tech Tool (VCADs Pro), Normal or Development mode, support 28 languages; 3. Support all brands and models supported by Tech Tool (VCADs Pro 3.06); 4. Make programmable more than 11000 parameters; 5. Program speed limit, change chassis ID, disable immobilizer; 6. Change minimum/maximum values of parameters, for example: increase speed limit;
Premium Tech Tool (PTT) is an application for the Aftermarket, developed to support efficient service and diagnosis. Premium Tech Tool is available as a connected version or as an unconnected version. The unconnected version is called Premium Tech Tool Connectionless (PTTC) and that is that we offer. PTTC is used in workshops that do not have internet access, but both versions are referred to as PTT. PTT provides access to the Guided Diagnostics and VCADS.
Vocom Communication Unit is designed with focus on robustness and durability to withstand the tough workshop environment. ·Improved LED indicators ·Improved quality of cables ·Military standard on connectors ·Better liquid and dust ingress protectors ·Metal casing and rubber bumpers for better robustness Vocom Key Facts Parts no. for Vocom Cables Temperature Range: -40° – +85° (Wlan-20°- +65°) Protection Class: IP55 Shock Resistance: 2m RoHS Conformance: Yes Wlan: 802.11 b/g Dev2tool is the Dealer tool to access and program parameters in Level2 and Level3 without connecting to central severs; Works with Tech Tool (VCADs Pro), Normal or Development mode, support 28 languages; Support all brands and models supported by Tech Tool (VCADs Pro);Make programmable more than 11000 parameters. Program speed limit, change chassis ID, disable immobiliser; Change minimum/maximum values of parameters, for example:increase speed limit; The new rugged Communication Unit Vocom 88890300 for the tough workshop environment and field service.
Some customer is having trouble connecting the device to Autel update server. Show error as follows:
The reason why that happens is because customer network environment can’t access Autel server, the DNS domain IP address is not allowing it to access autel server.
To fix this problem. You can do as follows: Go to system settings:
Then do as follows:
After that, you will see the device connect to the Autel update server normally and you can download the update normally now.
FREE Activation for JPRO Commercial Vehicle Diagnostics FEATURE LIST JPRO Professional Diagnostic Software, includes all features provided by the following modules: -JPRO Heavy-Duty Module -JPRO Heavy-Duty Command Module – Cummins -JPRO Heavy-Duty Command Module – Detroit -JPRO Heavy-Duty Command Module – International -JPRO Heavy-Duty Command Module – Mack and Volvo -JPRO Heavy-Duty Command Module – Paccar -JPRO Medium-Duty Command Module – Ford -JPRO Medium-Duty Command Module – GM -JPRO Medium-Duty Command Module – Isuzu -JPRO Medium-Duty Command Module – Sprinter
Here the STEPS: 1. Install JPRO 2017 v1, download here: JproSetup2017v1 2. Run “HWID3p”, Save to File/ Notepad, then send to my email here: Contact Us I’ll help to create “regkey.dat” file, to activate your JPRO 2017 v1, download here: HWID3p.rar 3. Open “Windows Firewall with Advanced Security”, please “Block the connection” on both Inbound Rules and Outbound Rules: -AmpliAuthentication.exe -Fleets.exe Find the files on C:Program Files (or Program Files x86)NoregonJPRO Diagnostics 4. Copy all files on “copy to JPRO” folder to C:Program Files (or Program Files x86)NoregonJPRO Diagnostics download here: copy to JPRO.rar -J2017_1.exe -il.dll -20171.xex.config -20171.xex -regkey.dat (License File)
5. Run “J2017_1.exe” as Administrator, click on “Unexpired” box, then click “Activate” until Activation process is DONE.
SVCI 2020 commander with full 21 software does not require activation; Won’t be locked, adds Suzuki, JLR and Daihatsu software which other FVDI does not support. Comes with NXP Smart Chip, Fast Speed. SVCI 2020 supports functions including engine diagnosis, fuell consupmsion, ater tempreture, key macthing, mileage code, setting etc. VW Audi special function has been added at October, Support MQB platform and Component Protect. more special funtions are coming soon…
SVCI 2020 FVDI AVDI ABRITES Commander Full Version IMMO Diagnostic Programming Tool with 22 Latest Software
1.SVCI V2020 Full Version with total 22 software, which supports vehicles till year 2019. 2.All VAG Special Functions Activated like MQB Platform and Component Protect. 3.SVCI V2020 Adds Suzuki, JLR and Daihatsu software (other SVCI can’t support) 4.Jaguar Landrove/ SUZUKI /DAF Special Funcdtions Work! 5.Adds 19 Software Compared to FVDI 2018. 6.NXP Smart Chip, Fast Speed. 7.Operating System: Win7 and Win10. 8.Unlock Version, No Need Activation. 9.Language: English, French.
How to add Audi Q7& A6 Keys Via SVCI 2020?
1.Click “Audi” button>>“Continue”, then it will connect to the interface and check for programmer.
2.Choose “Special functions”>>“EZS-Kessy(Q7/A6)”.
3.Click “Load from EZS-Kessy by OBDII”>>“Read EEPROM”>>enter the number of keys to learn, say, “2”>>“Make dealer key”.
4.Put the key into the programmer. The ABRITES Commander interface should also be connected to the car. Then click “Yes” to continue.
5.When the transponder is written successfully and locked, click “OK”, then choose “Learn keys”.
6.Press “OK” after giving on ignition with each key. Remember that when you remove one key and put another, the time between this should not exceed 5 seconds.
Job is done! SVCI V2020 can add keys for Audi Q7/A6 within a few minutes! Isn’t it convenient for you?
FEATURE LIST JPRO Professional Diagnostic Software, includes all features provided by the following modules: -JPRO Heavy-Duty Module -JPRO Heavy-Duty Command Module – Cummins -JPRO Heavy-Duty Command Module – Detroit -JPRO Heavy-Duty Command Module – International -JPRO Heavy-Duty Command Module – Mack and Volvo -JPRO Heavy-Duty Command Module – Paccar -JPRO Medium-Duty Command Module – Ford -JPRO Medium-Duty Command Module – GM -JPRO Medium-Duty Command Module – Isuzu -JPRO Medium-Duty Command Module – Sprinter
Here the STEPS: 1. Install JPRO 2017 v1, download here: JproSetup2017v1 2. Run “HWID3p”, Save to File/ Notepad, then send to my email here: Contact Us I’ll help to create “regkey.dat” file, to activate your JPRO 2017 v1, download here: HWID3p.rar 3. Open “Windows Firewall with Advanced Security”, please “Block the connection” on both Inbound Rules and Outbound Rules: -AmpliAuthentication.exe -Fleets.exe Find the files on C:Program Files (or Program Files x86)NoregonJPRO Diagnostics
4. Copy all files on “copy to JPRO” folder to C:Program Files (or Program Files x86)NoregonJPRO Diagnostics download here: copy to JPRO.rar -J2017_1.exe -il.dll -20171.xex.config -20171.xex -regkey.dat (License File)
5. Run “J2017_1.exe” as Administrator, click on “Unexpired” box, then click “Activate” until Activation process is DONE.
Cold Mode -The ECM limits engine power during cold mode operation and the ECM modifies injection timing during cold mode operation. Cold mode operation provides the following benefits:
Increased cold weather starting capability Reduced warm-up time Reduced white smoke
-The Electronic Control Module (ECM) limits engine power during cold mode operation. The ECM may modify the injection timing and the ECM may cut out certain engine cylinders. This will increase startability and this will reduce warm up time. Cold mode is activated whenever the engine coolant temperature falls below a predetermined value. Cold mode remains active until the engine has warmed or a time limit is exceeded.
Cold Mode Operation -The ECM will set the cold start strategy when the coolant temperature is below 18 °C (64 °F). -When the cold start strategy is activated, low idle rpm will be increased to 1000 rpm and engine power will be limited. -Cold mode operation will be deactivated when any of the following conditions have been met:
Coolant temperature reaches 18 °C (64 °F). The engine has been running for 14 minutes.
-Cold mode operation varies the fuel injection amount for white smoke cleanup. Cold mode operation also varies the timing for white smoke cleanup. The engine operating temperature is reached before the walk-around inspection is completed. The engine will idle at the programmed low idle rpm in order to be put in gear. -After the cold mode is completed, the engine should be operated at low rpm until normal operating temperature is reached. The engine will reach normal operating temperature faster when the engine is operated at low rpm and low-power demand.
No Engine Speed -It’s normal to see the “No Engine Speed” on Status Flags while power switched ON or Engine Cranking. It will not go away until the Engine Starts, even when you are seeing Engine Speed in Status Tool on CAT ET Software.
IMPORTANT NOTICE. We have JCB Service Master Challenger values Password Generator available for Normal, High Security, and WinEEM4 values. Please contact us, for more information
JCB ServiceMaster 4 v1.88.3 is diagnostic software for agricultural machinery and engines JCB. Electronic product JCB ServiceMaster 4 is diagnostic software, which contains complete information for diagnostics and calibration of agricultural machinery and engines company JCB.
Setting the diagnostic program Heavy Duty Truck Scanner JCB ServiceMaster to a personal computer, users have access to view a variety of information, including information that is stored on the DVD. The program will allow you to perform the following functions: – Troubleshooting; – Standard Test service; – View and edit generated data; – ECU Flash files with the correct data. Calibration program JCB ServiceMaster 4 v1.88.3 allows the user to diagnose the construction, agricultural machinery, and engines JCB. On our site, you can order a diagnostic program. Once you get the software, we will send all the instructions necessary to install and provide after-sales service.
عضو شوید
عضویت سریع
آمار مطالب
آمار بازدید
