XTOOL IK618 Best Auto Key Programmer Like X100 Elite
﹡IMMO & Key Programming
﹡Bi-Directional Control
﹡31+ Services
﹡OE Level All Systems Diagnostics
﹡Ultra Compatibility to Extend Capabilities
﹡Wider Vehicle Coverage
﹡Robust Hardware
﹡Online Support & Life Time Warranty

Professional IMMO & Key Programming

XTool IK618 is a professional car key programming tool that can perform pro-level key programming and IMMO functions as below:

— Read pin
— Add transponder/smart key/remote learning, disable lost keys, make Key Learning for BMW cars 4/3/2/1
— Key programming for VW, for Audi, for Skoda, for seat, for Bentley, for 4th, 5th, mqb IMMO
— Make key dealer key for Toyota & for Lexus (with KS-1 key programmer)
— Make reseller key for Mitsubishi (with KS-2 key programmer)
— Immo ECU reset/encode
— IMMO data backup/restore
— Read & write key chips
– – Read & write Mercedes infrared keys
— Read and write EEPROM
— Detect remote frequency

OE Level All Systems Diagnostics + Bi-Directional Control

IK618 bi-directional scan tool comes with OE level all systems diagnostic capabilities that you can only find in dealer-tool previously. It can scan all available systems to perform diagnostics including:

> Pull Codes: including manufacturer-specific codes, pending codes, permanent codes
> Clear Codes: Clear codes, reset monitors and turn off warning lights
> Live Data: Live data stream from various sensors including misfire, engine rpm, transmission fluid temperature and etc.
> Freeze Frame: Retrieve parameters when DTC is recorded for better diagnostics.
> ECU Information: Check ECU version and etc.
> Active Tests: EVAP Tests, Test injectors, cooling fan, A/C Clutch, Windows, Doors, Sunroof, ABS Motor Pump, solenoids, relays and etc.

30+ Reset Services

XTOOL X100 IK618 auto scan tool comes with comprehensive service options including Oil Reset, EPB, SAS, DPF, BMS, Injector Coding, IMMO Keys, ABS Bleed, Throttle Relearn, Gearbox Match, Suspension Calibration, Headlight, Window Reset, Seat Match/Configurations, Tire Refit, Crankshaft Position Variation Learn, Airbag Reset, Disable Transport Mode, Electronic Pump Activation, EEPROM Adapter and etc.

14 Kinds of Language

XTOOL IK618 supports 14 languages: English, Spanish, German, French, Portuguese, Italian, Finnish, Arabic, Japanese, Thai, Korean, Polish, Russian, Chinese
Note: If you need to modify the language, please provide the SN number to XTOOL

Live Data Stream

XTOOL IK618 display live data stream in text or graph like misfire data, engine rpm, transmission oil temperature, mass air flow sensor data, cylinder balance rates, fuel pressure, actual fuel temperature vs desired fuel temperature and etc

— Compatible with KC-501, KS-1, Can Fd Key Programmers

— XTOOL IK618 comes standard with KC-100 key programmer. However, you may choose to get KC-501, KS-1, KS-2 key programmers to extent its capabilities to the next level.

— It’s also can works with the CAN FD adapter and M281

1.IK618

2.with KC501

3.with M821

4.with KS1

5.with KC501 M821

6.with KC501 KS1

7.Full Set with KC501 M821 KS1

XTool IK618 Packing List:
P710 Tablet x1,
KC100 Programmer x1,
EEPROM Adapter x1,
Power adapter for Tablet x1,
US Standard Charger x1,
EU Standard Charger x1,
VGA to DB15 Male Main Cable x1,
OBD2-16 Connector x1,
USB3.0 Cable x1,
Mini USB to USB-C Cable x1